upgrading an Apple //e to a Apple IIGS    Page No.:GS02
			Several of us "old guys" that play around with Apple-computersystems have some shelves with plenty spare stuff - so this probably might    be a task that you might want to execute....    Apple offered in the beginning time of the introduction of the IIGS the possibility to upgrade the //e to a IIGS with an Upgrade-Kit. In fact you    don´t really need a kit to do this, because every IIGS-mainboard with the ROM 0 or ROM 1 can be used for this. All these Mainboards have    the area labelled with "Keyboard" and if you take a closer look to tha Powerplugarea you will recognize that also a sparearea is reserved    to be populated with a powerconnector as it was used with the old apple powersupplies.    You might chose to populate that plug or alter a powersource with a straigt plug to fit on the normal connectionpins. I altered the plug at    the powersource. In the following pictures below the project is documented step by step.
			due to european laws and german court decision:  I hereby declare no responsibility to any "deep links" resulting from the links in this page. I have no influence to the pages linked hereby in this page and the  contents in those pages. I therefor can´t take any kind of responsibility to contents in the pages, where these links direct the readers browser to nor to the  contents resulting from following up links from those pages. The reference to contents by this links is dependent ro the status of the date when the links have  been set ( April 2013 ) and it might occur that references and contents may change by the fact that domains may have been discontinued from their former owners.  In such cases i can´t take any kind of responsibility to the changed contents. this is specialy valid to banners, advertisements or merchandising links in the targeted  pages.